Help! Need some suggestions

Aero 125, Elite 125, Elite 150, SH150i, Elite 250, Helix, Big Ruckus, Reflex, Silverwing and PCX 125 / 150, Forza
Post Reply
User avatar
birdmannn101
Rim Kicker
Rim Kicker
Posts: 35
Joined: Sun Aug 21, 2016 1:02 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: Indianapolis, IN
Contact:

Help! Need some suggestions

Post by birdmannn101 » Wed Jan 31, 2018 7:31 pm

Need to sand blast, paint and mount new tires on this CH150D. I tried getting the 1971 tires off the rim and they wouldn't budge. So, someone suggested cutting the tire with a saw and taking it off that way. Still can't get the tires to release from the rim.

https://postimg.org/image/qf0aw6jo9/

Any suggestions would be appreciated.

Dan

User avatar
Dan Durston
Site Admin
Site Admin
Posts: 2711
Joined: Tue Nov 18, 2008 2:07 am
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: Victoria, BC
Contact:

Re: Help! Need some suggestions

Post by Dan Durston » Thu Feb 01, 2018 12:59 pm

Wow that's on there. Is it somehow bonded to the rim? Or the bead is just really tight?

With old tires, I normally lay then down on their side and drive over the rubber with a vehicle to unseat the bead.

You might be able to shove a solid stick/bar inside the tire now that you've got it cut, and then pry upwards after securing the rim somehow. Perhaps mount the wheel, put the e-brake on, and then pry? Just an idea - perhaps a poor one.
Scooters Owned: 2003 Ruckus, 2006 Ruckus, 1983 Yamaha Beluga 80, 2007 Vespa LX 150, 2009 Yamaha BWS 125, 2008 Ruckus

User avatar
Florida Antique
Step Thru Star
Step Thru Star
Posts: 106
Joined: Tue Mar 10, 2015 6:21 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: Damnifino
Contact:

Re: Help! Need some suggestions

Post by Florida Antique » Fri Feb 02, 2018 11:55 pm

Get a 8' 2x4. Measure the height your car's bumper is off the driveway. Cut that much off the 2x4. Lay the tire under the bumper and place the cut off piece vertically on the tire next to the rim. Place the longer piece of the 2x4 under the bumper and on top of the vertical 2x4. Use that as a lever to push the bead off the rim. That should give you enough leverage to get the tire off.
'84 Honda Aero 125
'05 Yamaha Zuma 50 (dual headlight mod)
'09 Yamaha Vino Classic (one of them new fangled 4 stroke things)

Image
http://scooters4hooters.com/

User avatar
tiny
Throttle Master
Throttle Master
Posts: 642
Joined: Tue Aug 28, 2012 5:01 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: Mississauga Ontario
Contact:

Re: Help! Need some suggestions

Post by tiny » Sun Feb 04, 2018 10:41 am

Looks like the old tyre is rotted right to the rim. ive seen it at work with a Bricklin SV 1 that need new tyres(OEMs from '74) and the we had to cut the old ones off the rim then carefully grind the excess off the lip. That may be your only choice. Good luck Mate.
'02 Vino 2t, KYMCO ZX50, '13 KYMCO Movie 150

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests