http://www.motorscooterguide.net/Forum/

Honda ch150 bystarter question
http://www.motorscooterguide.net/Forum/viewtopic.php?f=6&t=4182
Page 1 of 1

Author:  colonelstan [ Sat Sep 09, 2017 7:32 am ]
Post subject:  Honda ch150 bystarter question

Gentlemen, I need your assistance from this college of scooter knowledge. I've diagnosed a hard starting problem on a ch150 as a bystarter issue. I've purchased a new bystnot attached to the arter. It arrived and the black plastic body of the bystarter was not attached to the brass needle. They are of course always pictured as one assembly. If anyone knows - was this damaged in transit or is this how they generally arrive to be assembled and installed? Thanks for your help. Colonelstan

Author:  kevinv710 [ Sun Sep 10, 2017 12:23 am ]
Post subject:  Re: Honda ch150 bystarter question

regularly they are in one assembly....it might has popped out in transit, just put it back in and good to go, no problem.

Author:  colonelstan [ Sun Sep 10, 2017 7:33 am ]
Post subject:  Re: Honda ch150 bystarter question

Hello all, this is colonelstan. Thanks for the speedy reply. I discovered that the part arrived broken. The vendor has agreed to send a new part. Best to all. colonelstan

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/