August 27, 2010 at 1:06 am
#28314
eternal05
Participant
My last set of bodywork was so shitty that the pointy-side-bits on the upper fairing (i.e., where the fairing gets closest to your knees) didn’t even attach to the rubber grommets they were supposed to. I had to zip-tie them to the chassis. I also tried to use duct-tape to “fix” the kickstand sensor after I thoughtlessly removed my kickstand mid-trackday. Worked great! Until 3/4 of the way down the 0.9 mile front straight at PIR the duct tape stretched out, the sensor’s piston got loose, and my engine cut out at 150mph
Ahhh, the lessons learned.