help with a 1999 kymco fever

Everything to do with the increasingly popular and nice scooters coming out of Taiwan.
Post Reply
steve w hebburn
n00b
n00b
Posts: 3
Joined: Thu May 16, 2019 4:56 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: hebburn, south tyneside
Contact:

help with a 1999 kymco fever

Post by steve w hebburn »

hi, im steven from hebburn, south tyneside. i have just joined the forum. and looking for help on a scooter i have just bought as a cheap project. :shock: . its a good condition , low miles, t reg, kymco fever 50. and has been stored in a garage for 10 years :roll: i got it turning over, but looks like a weak spark.( used a jump start pack ) it wont start. the battery is u/s of course.will have to buy a new 1. unstuck the throttle needle in the carb, so it now moves. drained the petrol tank, & willl fit a new spark plug. is this little scooter worth spending a bit of money on :?: thanks for any help/info. :D steven
steve w hebburn
n00b
n00b
Posts: 3
Joined: Thu May 16, 2019 4:56 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: hebburn, south tyneside
Contact:

Re: help with a 1999 kymco fever

Post by steve w hebburn »

hi, update....scooter now starts ok. :roll: . it will idle until i try to rev it. then it bogs down & engine stops. have removed air filter & it fell to bits :o flushed & refilled fuel tank. im now thinking maybe some of the carb jets might still have a blockage( poss main). as previous said, been sitting 10 years. all electrics now working. any advice guys :?: steve.
steve w hebburn
n00b
n00b
Posts: 3
Joined: Thu May 16, 2019 4:56 pm
To prevent spam, enter the year 'modern' scooters were first sold in North America (hint: 1982): 1982
Location: hebburn, south tyneside
Contact:

Re: help with a 1999 kymco fever

Post by steve w hebburn »

hi, no replies or info ? :roll: sorted without any help :D . replacement carb fitted from a daelim 50. revs fine now. everything else working fine. steve. :P
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests