- This topic has 5 replies, 5 voices, and was last updated 14 years, 1 month ago by J.R..
Best way too fix Plastic
-
AuthorPosts
-
February 8, 2010 at 8:14 pm #3695J.R.Participant
I cracked the plastic that runs on the far right side of the instrument panel on my ninja 250. it starts at the top by the window and goes down about 4 inches. Its not the outside fairing its the plastic panel that sits around the instrument panel. PLEASE help What is the best solvent to use
February 8, 2010 at 10:48 pm #24460briderdtParticipantI’ve never used the stuff, nor have I seen it used, but I’ve seen it referred to on the SVRider board quite often.
February 9, 2010 at 2:27 pm #24472BouncingRadicalParticipanthttp://www.restockit.com/Flexible-Bumper-and-Plastic-Patch-Kit-(TSL3310).html?source=froogle&Bvar5=100F1&Bvar6=100F1&Bvar7=100F1
February 9, 2010 at 4:48 pm #24474SantaCruzRiderParticipantThe instrument panel should fix well with a 2-part epoxy — it comes in black so no issue.
This is different plastic from the fairing, which is an ABS and responds well to ABS cement (the kind plumbers use on ABS pipe).
February 10, 2010 at 12:06 am #24484IxecapadeParticipantE6000 is a pretty good industrial strength glue. not sure how well it does as far as ‘clear’ but if you don’t smear it all over the place its no big deal.
February 10, 2010 at 2:02 am #24490J.R.Participantthanks for the help and what kind of 2 part epoxy? can you throw out some brands, some examples will help
-
AuthorPosts
- You must be logged in to reply to this topic.